LXMG221W-0700030-D0 p roduction d atasheet microsemi analog mixed signal group one enterprise, aliso viejo, ca. 92656, 800-877-6458, 949-380-6100, fax: 949-215-4996 page 1 copyright ? 2011 rev. 1.0, 2012-04-17 30w 700ma dimmable led driver module tm ? www. microsemi . com LXMG221W-0700030-D0 ? description key features the LXMG221W-0700030-D0 is a highly reliable 30w solid-state led lighting driver module with a galvanic isolated output. it is compliant to energy star for commercial, industrial and residential applications. it is compatible with 50hz and 60hz ac power sources worldwide with standard voltages ranging from 120vac +/- 10% to 277vac +/- 10%. the output is a 700ma dimmable constant current source. it complies with ul, cul and ce standards for safety standards and emc. low voltage dimming control is available when using the dedicated dimming control input leads, dim(+) and dim(-). the amplitude of the output led string current will vary from 10% to 100% corresponding to a 1v dc to 10v dc signal on dim(+) input following iec 60929 annex e.2.3. a minimum dim level of 10% shall be obtained with dim(+) input shorted to dim(-). ? energy star compliant ? > 50k hour life at 60c ? constant current output ? 0 ? 10v dc , pwm and pot dimmable ? suitable for damp locations ip66 ? suitable for plenum locations ? isolated output, selv ? high efficiency/cool running ? universal ac input ? ul, cul, and ce standards e337545 ? eu rohs, reach compliant ? full protection: ovp, scp, otp, maximum power limit ? small compact size applications worldwide residential and commercial led lighting fixtures such as: ? led down lights product highlight photo is representative only, actual product may differ order information part number input volt age output voltage rang e and full scale current (i fs ) LXMG221W-0700030-D0 120v ac to 277v ac ; 47 to 63hz 17v to 40v at 700ma
LXMG221W-0700030-D0 p roduction d atasheet microsemi analog mixed signal group one enterprise, aliso viejo, ca. 92656, 800-877-6458, 949-380-6100, fax: 949-215-4996 page 2 copyright ? 2011 rev. 1.0, 2012-04-17 30w 700ma dimmable led driver module tm ? www. microsemi . com LXMG221W-0700030-D0 absolute maximum ratings ac input voltage............................................................................................................... ...................................... 0 to 305v ac dim(+) (relative to dim(-)) ............................................................................................................................... ... -20v to 42.4v dim(+) voltage (relative to output(-)) ........................................................................................ ..................... -20v to 42.4v operating hu midity ............................................................................................................ ............ 5 to 95% (n on-condens ing) input po wer ................................................................................................................... ..................... 38w (int ernally limited) output led stri ng current .................................................................................................... ......... 810ma (internally limited) output string voltag e ........................................................................................................ .............. 42.4v (internally limited) output power .................................................................................................................. .................... 34w (int ernally limited) case storage tem perature range ................................................................................................ ................... -40c to 105c note: exceeding these ratings coul d cause damage to the device. currents are pos itive into, negative out of specified termina l. typical operating conditions parameter symbol test conditions / comment min typ max units led string output voltage range v out(+) at full load current 17 40 v at minimum load current (dimmed to 10%) 15 out(-) sink current out(-) isink i fs 700 ma linear dim(+) control input voltage range v dim(+) 0.95 10 v dim(+) control pwm frequency range v dim(+)_pwm open collector drive 200 1000 hz dim(+) control pwm duty cycle range v dim(+)_dc 9.5 100 % 0 100 200 300 400 500 600 700 800 \ 30 \ 15 0 153045607590 led output current (ma) case temperature (c) typical temperature derating curve dim(+) ? = ? 10v dim(+) ? = ? 1v 0 100 200 300 400 500 600 700 800 90 120 150 180 210 240 270 300 led output current (ma) input supply voltage (v ac ) typical supply voltage derating curve dim(+) ? = ? 10v dim(+) ? = ? 1v
LXMG221W-0700030-D0 p roduction d atasheet microsemi analog mixed signal group one enterprise, aliso viejo, ca. 92656, 800-877-6458, 949-380-6100, fax: 949-215-4996 page 3 copyright ? 2011 rev. 1.0, 2012-04-17 30w 700ma dimmable led driver module tm ? www. microsemi . com LXMG221W-0700030-D0 electrical characteristics the following specifications apply over the recommended operating te mperature of -20c to 60c and the full input voltage range . except where noted, testing is performed at 25c, with 120 v ac , 240 v ac and 277 v ac , v out = 37.5 2.5v, i out = i fs parameter symbol test conditions / comment min typ max units input voltage v ac line frequency 47hz to 63hz 108 305 v ac input ac current i ac 120v ac input 0.265 a i ac 240v ac input 0.136 i ac 277v ac input 0.121 peak inrush current i ac measure at 277v ac peak ac line; prior to first ac zero crossing 12 a measure at 277v ac peak ac line; after first ac zero crossing 0.6 5 power factor pf v ac = 120v ac and 277v ac , maximum load 0.9 pf efficiency v ac = 120v ac and 277v ac , maximum load, after 30 minutes operation 88 90 % total harmonic distortion t.h.d. v ac = 120v ac and 277v ac , maximum load 10 % output current source average sink current i out(-) v ac = 120v ac , 240v ac and 277v ac , full bright 95 100 105 %i fs line regulation i out(-) v ac = 120v ac and 277v ac , maximum load 1 %i fs dc controlled dimming(per iec 60929, annex e2.1 - 2.3) dimming control voltage v dim maximum brightness 9.5 v mid (50%) brightness 4.5 4.75 5.0 minimum brightness 0 1.05 output current i fs maximum current; v dim = 10v 665 700 735 ma i out(-) mid current ; v dim = 4.75v 47.5 50 52.5 %i fs minimum current; v dim = 1v 8 10 12 dimming control current i cont the led driver sources dim current 1.19 1.25 1.37 ma start up turn-on time t start cold start to 90% i fs 150 200 ms turn-off time t turnoff full on to 10% i fs 100 power on overshoot i out(-) turning power on 10 %i fs operating ambient 1 t ambient ambient implies air surrounding unit -30 60 c cold start temperature t start minimum cold start up temperature -30 c protection ov threshold v out(+) relative to v out- ; i out- = 0 (open circuit); 41 41.2 42.4 v pk maximum case hot spot 1 t sd just prior to thermal shutdown. 90 105 110 c 1 the unit will operate continuously at full power in the operating am bient range. with an elevated ambient temperature, the uni t will shut down prior to reaching a hot spot case temperature in excess of the specified maximu m, when the unit cools approximately 8c it will recover.
LXMG221W-0700030-D0 p roduction d atasheet microsemi analog mixed signal group one enterprise, aliso viejo, ca. 92656, 800-877-6458, 949-380-6100, fax: 949-215-4996 page 4 copyright ? 2011 rev. 1.0, 2012-04-17 30w 700ma dimmable led driver module tm ? www. microsemi . com LXMG221W-0700030-D0 safety & emc compliance ul/cul /ce safety ul 8750, ul1310 class 2 canada: can/csa-c22.2 no. 223 class 2 en 60598-1&2; 61347-1, en61347-2-13 fcc title 47, part 15, class b conducted and radiated emission en 55015; cispr22 class b conducted emission (mains and dimming terminals) en 61000-3-2 class c; ansi c82.77 power factor and harmonic current emissions en 61000-3-3 voltage fluctuations and flicker en 61547 en61000-4-2 electrostatic discharge immunity en61000-4-3 radiated susceptibility test en61000-4-4 electrical fast transient en61000-4-5 surge immunity test (2kv) en61000-4-6 conducted susceptibility immunity test en61000-4-8 power frequency magnetic field immunity en61000-4-11 voltage dips and interruption immunity iec 62384 performance requirements for ac or dc supplied control gear for led modules ieee c.62-41-1991 100khz, 2kv ring wave per energy star (pending) energy star sound < 24dba; class a sound rating per energy star (at all dimming settings) (pending) life expectancy 50,000 hours @ 100% duty at ambient temperature 60c and max load environmental standards eu rohs, reach lead description name description input terminal leads (18awg plenum rated) ac line main input power supply line (120v ac to 277v ac ) ? brown wire ac neutral main input power supply neutral- blue wire control terminal leads (22 or 24 awg plenum rated) dim(+) analog dimming input ? purple wire dim(-) dimming return ? grey wire output terminals (18awg plenum rated) output(+) led string anode voltage (high side) ? red wire output(-) led string cathode voltage (low side) ? yellow wire
LXMG221W-0700030-D0 p roduction d atasheet microsemi analog mixed signal group one enterprise, aliso viejo, ca. 92656, 800-877-6458, 949-380-6100, fax: 949-215-4996 page 5 copyright ? 2011 rev. 1.0, 2012-04-17 30w 700ma dimmable led driver module tm ? www. microsemi . com LXMG221W-0700030-D0 conditions of acceptability the components have been judged on the basis of the required spacings in the standard for class 2 power units, ul 1310. the input and output leads are 18 awg, rated min. 300v, 105oc, vw -1. the suitability of the leads shall be determined in each end-use application. the leads are suitable for field wiring, except for when installe d with alternate lead colors below, are suitable for factory wiring only. the polymeric housing is rated v-0 and has been subjected to a ball-impact and mold stress relief tests. the need for a suitab le enclosure shall be considered in the end product. the component has been evaluated for dry and damp locations , where the humidity conditioni ng and dielectric tests were conducted per ul 8750. the maximum temperature measured on housing outside surface was 56 c during the temperature test when shifted to ambient temperature 40 c. the temperature test was co nducted without potting compound. the necessity for repeating the temperature test shall be determined in each end use application. a proper mechanical, electrical and fire enclosure shall be provided in the end-use application that is in compliance with all the applicable requirements of the end-use application. testing was on a 20 a branch circuit. if used on a branch circuit greater than this, additional testing may be necessary. the led driver is rated as noted in the electrical ratings tabl e above, and the outputs comply with the requirements for class 2. the need for additional evaluation shall be considered in the end product if used beyond these ratings. the led driver is provided with dimmer leads for connecting an external dimmer. th e leads colors are shown as below. the dimmer circuit is considered as class 2 circuit. the routing of the dimming leads shall be determined in the end use applicati on. lead function color ac line brown ac neutral blue output(+) red output(-) yellow dim(-) gray dim(+) purple
LXMG221W-0700030-D0 p roduction d atasheet microsemi analog mixed signal group one enterprise, aliso viejo, ca. 92656, 800-877-6458, 949-380-6100, fax: 949-215-4996 page 6 copyright ? 2011 rev. 1.0, 2012-04-17 30w 700ma dimmable led driver module tm ? www. microsemi . com LXMG221W-0700030-D0 typical characteristic charts 25c 0 10 20 30 40 0 100 200 300 400 500 600 700 012345678910 led ? string ? voltage ? (v) output ? current ? (ma) dim(+)(v) dim(+) ? input ? vs ? output ? current ? and ? led ? string ? voltage ? @ ? vin ? = ? 240v ac output ? current led ? string ? voltage 0.5 0.6 0.7 0.8 0.9 1 036912151821242730 power ? factor output ? power ? (watts) power ? factor ? vs ? output ? power pf ? @ ? 120vac pf ? @ ? 240vac pf ? @ ? 277vac 78 80 82 84 86 88 90 036912151821242730 efficiency ? (%) output ? power ? (watts) efficiency ? vs ? output ? power efficiency ? @ ? 120vac efficiency ? @ ? 240vac efficiency ? @ ? 277vac
LXMG221W-0700030-D0 p roduction d atasheet microsemi analog mixed signal group one enterprise, aliso viejo, ca. 92656, 800-877-6458, 949-380-6100, fax: 949-215-4996 page 7 copyright ? 2011 rev. 1.0, 2012-04-17 30w 700ma dimmable led driver module tm ? www. microsemi . com LXMG221W-0700030-D0 application information mechanical drawing 40 mm 8.8 mm 3.5 mm r 1.75 mm 5.50 5.5 mm 29.2 0.3 mm all dimensions are in millimeters wire length is 210mm 10mm, strippe d 12mm 5mm ul1015 awg#18 16/30 stranded 105c input & output wires; awg#22 or 24 stranded control wires, all wires tinned. please insure the wire nuts are installed correctly to prevent intermittent operatio n. connecting the ac input to control or output wires will result in damage to the module.
LXMG221W-0700030-D0 p roduction d atasheet microsemi analog mixed signal group one enterprise, aliso viejo, ca. 92656, 800-877-6458, 949-380-6100, fax: 949-215-4996 page 8 copyright ? 2011 rev. 1.0, 2012-04-17 30w 700ma dimmable led driver module tm ? www. microsemi . com LXMG221W-0700030-D0 notes production data ? information contained in this document is proprietary to microsemi and is current as of publication date. this document may not be modified in any way without the express written consent of microsemi. product processing does not necessarily include testing of all parameters. microsemi reserves the right to change the configuration and performance of the product and to discontinue product at any time.
|
